Attendance terminal
Not for offices. For sites.
IP65, −30 °C to +65 °C, 150,000 records in memory. It works at a warehouse door, under an eave, at a site entrance. Records survive an internet outage.
IP65 · dust and waterIn short
The Hikvision DS-K1T323MBWX-QRE1 is used on site, so spare parts, service and long-term availability are covered. It reads NFC cards, key fobs and QR codes, confirms audibly and visually, and holds 150,000 records in its own memory if the connection drops.
- Protection
- IP65, dust and water resistant
- Temperature
- −30 °C to +65 °C
- Memory
- 150,000 events, 3,000 cards
- Power
- PoE (IEEE 802.3at) or 12 VDC
Hardware
Not for offices. For sites.
- IP65Dust and water resistant
- −30/+65°Operating temperature, °C
- 150,000Event memory
- 3,000Card capacity
The Hikvision DS-K1T323MBWX-QRE1 access terminal is used on site: spare parts, service and a long service life. It works at a warehouse door, under an eave, at a construction site entrance. Records survive an internet outage.
All technical specifications
| Verification | NFC / Mifare M1 card (13.56 MHz) and QR code |
| Display | 2.4 inch colour TFT; employee name and time |
| Feedback | Audible and visual confirmation |
| Camera | 2 MP wide angle, WDR |
| Card capacity | 3,000 cards |
| Event memory | 150,000 records |
| Network | 10/100 Ethernet, Wi-Fi, Bluetooth |
| Power | PoE (IEEE 802.3at) or 12 VDC |
| Interfaces | Wiegand input, lock output 12 VDC / 1 A, exit button |
| Protection | IP65 |
| Operating temperature / humidity | −30 °C to +65 °C · 0–90% (non-condensing) |
| Mounting | Surface mounted on wall |
Technical figures are manufacturer data. Card options: blank NFC card, printed card with your logo, key fob tag, QR code.
Where office hardware fails
The site is not a meeting room.
- IP65
Rain and dust
A reader meant for a lobby does not last a winter outdoors.
- −30 °C to +65 °C
Cold and heat
Below zero in the morning, baking under an eave by noon.
- 150,000 records held
Connection drops
A device with no memory loses whatever happened while it was offline.
- Hikvision platform
Spare parts
An unbranded reader cannot be serviced two years later.
Even offline, no record is lost.
The terminal keeps recording while the connection is down and syncs when it returns. The gap closes itself.
Installation
What the site needs to provide.
- PowerPoE switch, or a 12 VDC line
- Network10/100 Ethernet, or Wi-Fi
- MountingSurface mounted on the wall at the entrance
- CardsBlank, printed with your logo, key fob, or QR
- FirewallNothing to open
Other features
From the terminal to payroll.
Frequently asked questions
Hardware questions.
If your question is not here, write to us directly — we usually reply within one business hour.
Ask on WhatsAppWhich terminal is used?
The Hikvision DS-K1T323MBWX-QRE1 access terminal, which reads NFC cards and QR codes and carries a 2.4 inch colour display.
Can it be mounted outdoors?
It is rated IP65 for dust and water and operates between −30 °C and +65 °C, so it works at a warehouse door, under an eave or at a site entrance.
How many records does it hold?
150,000 events and 3,000 cards. If the connection drops it keeps recording and syncs when the link returns.
How is it powered?
PoE (IEEE 802.3at) or 12 VDC. With a PoE switch a single cable carries both power and network.
What card options are there?
Blank NFC cards, cards printed with your logo, key-fob tags, and QR codes. All methods work at the same time.
Quote and scoping
Get a quote.
Tell us your headcount and how many sites you run, and we will come back with a quote. Terminal setup, employee import and card assignment are part of it. We usually reply within one business hour.